Doors

Panel Doors

Our offer includes panel doors based on the MB-86 system. It is a very visually attractive and, at the same time, technologically advanced product, which due to its design solutions and the rich diversity of colours for door fill, it can be, not only the functional and durable entrance into your home, but also its mark and decoration.
It is available in four versions: ST, SI, SI+ and AERO. On account of their technical parameters, panel doors are a perfect solution for improving the energy efficiency of buildings. They also provide the innovative ability to mount the panel in the structure using a double-sided tape.

• Solid construction
• Modernity, style and excellent appearance for years
• Tightness and insulation power

MB-79N

The MB-79N is a state-of-the art and economical addition to the Aluprof window & door systems. It has been designed to outperform typical thermal insulation requirements. The MB-79N series can be used to fabricate fixed, side-hung, hopper, tilt-and-turn, and hopper-and-slide windows, as well as single and double exterior doors, and storefront solutions complete with doors.
In addition to the economical version MB-79N E, featuring a one-component central seal, and the MB-79N ST version with a two-component central seal, Aluprof also offers the MB-79N SI variant with enhanced thermal insulation, and with profiles that come equipped with insulating inserts and a two-component central seal. For external doors, Aluprof also offers the MB-79N SI+ variant that comes with a central seal and insulating inserts inside the profiles.

• Profile depth: 79mm (casement) and 70mm (window frame and door leaf)
• Thermal breaks made of an innovative material with a brand-new shape allow the use of a seal in the area of profile insulation, in both windows and doors
• Windows in 3 thermal variants (MB-79N E, MB-79N ST, MB-79N SI) and doors in 4 thermal variants (MB-79N E, MB-79N ST, MB-79N SI and MB-79N SI+)
• Excellent kinematics enabling the fabrication of narrow, operable windows and doors
• Door leaf profiles have isolation joint, which eliminates thermal stresses during operation

MB-79N Us

The ALUPROF MB-79N US is a solution which is cost-effective and functional, while meeting every technical requirement. The system is used to build windows featuring sashes that are invisible from the outside. In a row of adjacent fixed and operable windows, it is impossible to distinguish between the two types. The result is an elevation where the windows present a uniform view, irrespective of their function.
The MB-79N US system is a finely tuned solution. Two versions of the rebate are available; the A-type frame partially covers the sash, while the B-type frame covers it completely in an ideal imitation of a fixed window. The external surfaces of the glass fitted to the operable and fixed windows lie on the same plane. A custom-designed adaptation profile means that frames and crosspieces from the basic MB-79N system can be used for the concealed sash windows.

• The structural depth of the profiles is 70 mm for the frame and 79 mm for the sash
• The profiles are designed for triple-glazing, with the central section serving as insulation between thermal breaks that are 33.5 or 36 mm wide
• The sash features an innovative, reinforced thermal break section which is highly deflection-resistant
• The windows have excellent Uf values, placing the system among the clear market leaders in its category
• The internal glazing gaskets are deeply embedded in the glazing beads, making them barely visible from the inside

MB-79N Casement

The MB-79N Casement is an outward-opening window system which features a thermal break and is used to create external architectural elements such as various types of windows, lobbies, shop windows and spatial structures providing excellent thermal and acoustic performance, along with first-class air- and watertightness. It meets every requirement for energy efficient and environmental protection.
Three variants of the aluminium profiles are available, with different technical parameters suiting various different needs. The E variant is the basic version, the ST variant offers a two-component central gasket and the SI variant features additional insulating inserts between the thermal breaks. Thanks to the wide range of profiles and their rigidity, the system makes it possible to produce large-scale, heavy structures. It also features superb kinematics, meaning that very small windows can be made as and when required.

• The profiles are designed for triple glazing, with the central section serving as insulation between thermal breaks that are 36 and 35 mm wide
• The system makes it possible to achieve a high thermal performance through the use of EPS insulating inserts fitted in the central section of the glazing unit profile.
• The excellent kinematics of the window ensure that operable structures with a vent size starting at 270 mm will operate correctly
• The system also offers solutions for balcony doors with a comfortable, low threshold and for frames used in renovation projects
• Glazing unit profiles can be powder coated and anodised

MB-70

MB-70 is a modern aluminium system intended for realizations of exterior architectural building elements requiring thermal and acoustic insulation, such as: various types of windows, doors, vestibules, display windows or spatial structures.
The system profiles have a three-chamber structure. The structural depth of the window sections is equal to 70 mm (frames) and 79 mm (casement), and for doors: 70 mm and 70 mm respectively. Such assumed depths of casement and frame sections give the effect of one surface from the exterior side after closing – in the case of the window, and the facing effect to the surface of casement and frames – in the case of doors.

• The MB-70 system is characterized by a very low value of the overall heat-transfer coefficient Uf, thanks to application of the thermal breaks and gaskets.
• The MB-70 system forms the basis for solutions featuring enhanced thermal insulation performance, such as: MB-70HI, MB-70US HI and for a curtain wall based on MB-70CW HI windows.
• The system allows application of sets of glass panel of the thickness equal from 21 mm to 57 mm in window casements, and from 12 mm to 48 mm in fixed windows and door leafs. Such a wide thickness range of infill guarantees the possibility to apply all typical and untypical glass panels.

MB-70 Hi

As a response to ever growing demand for building products featuring high insulation performance there have been designed door and window systems with a thermal barrier MB-70HI, MB-70US HI and a curtain wall based on the MB-70CW HI windows. Their construction is based on well-proven, well developed and highly appreciated base systems, i.e. MB-70, MB-70US i MB-70CW.
The thermal insulation performance of frames of this system is considerably higher than the insulation performance of base systems. The value of heat transfer coefficient Uf for constructions of the MB-70HI system – depending on the applied profiles and accessories – ranges between 1.0 and 2.3 W/(m2K).

MB-60

MB-60 is a modern aluminium system intended for realizations of exterior architectural building elements requiring thermal and acoustic insulation, such as: various types of windows, doors, vestibules, display windows or spatial structures.
The system profiles have a three-chamber structure. The structural depth of the window sections is equal to 60 mm (frames) and 69 mm (casements), and for doors 60 mm and 60 mm, respectively. Such assumed depths of casement and frame sections give the effect of one surface from the exterior side after closing – in the case of the window, and the facing effect to the surfaces of casement and the frames – in the case of doors. Shape of the profiles allows achieving slender and resistant window and door structures.
The MB-60 system is characterised by a low value of the overall heat-transfer coefficient U, thanks to application of the thermal breaks and gaskets. This system profiles meet the thermal requirements for the material group 2.1 in the case of windows, and 2.2 in the case of doors according to DIN 4108.

MB-60 Hi

In response to the ever-growing demand for building products with a high thermal insulation value, the MB-60HI, MB-60US HI, MB-60E HI and MB-60EF HI window systems with a thermal barrier have been developed. Their construction is based on the proven and tested, expanded and valued base MB-60, MB-60US, MB-60E and MB-60EF systems.
Visualisation For the constructions of the MB-60HI system, the overall heat-transfer coefficient Uf amounts to from 1.48 W/(m2K) depending upon the profiles and accessories used.
Thermal insulation is improved by placing special inserts in the central chambers of aluminium profiles. Owing to a low value of the heat-transfer coefficient, the inserts reduce heat transfer through the construction. The central location of the inserts also reduces heat transfer by convection and thermal radiation.